The 105mm PGU 45/B is a high lethality version of the 105mm employing HF1 steel material. The PGU version of the 105mm has a lethal fragmentation area 25% greater than the M1 shell and a 50% and 75% increased effectiveness against light material targets and personnel, respectively.

This ammunition is employed on the US Special Forces MC-130H Combat Talon and AC-130H Spooky aircraft. These aircraft carry 105mm cannons mounted on the left side and are utilized in close ground support roles to infiltrate, re-supply, and exfiltrate special operations forces..

General Dynamics Ordnance and Tactical Systems offers complete, modular weapon payload systems to support a variety of weapons platforms. Such modular payloads include not only gas generators and inflatable devices, but all the related structural members, electronic and/or pyrotechnic communication lines and safe/arm/fuze devices as well as associated dunnage and munition retention devices.

General Dynamics Ordnance and Tactical Systems designs and produces payload sections and ejection systems for the Sensor Fuzed Weapon (SFW) and the Joint Stand Off Weapon (JSOW). GD-OTS is recognized as the industry leader in payload section design and payload ejection systems for air delivered munitions.

General Dynamics Ordnance and Tactical Systems and Denel are teamed to bring the United States the most advanced non-developmental artillery ammunition suite available in the world today. The 155mm family offers a full spectrum of ballistically matched effects out to 30 kms with demonstrated interoperability in 39 and 52 caliber platforms. With field interchangeability between a Boat Tail and a Base Bleed, the 155mm ammunition suite offers range and accuracy unmatched in current inventory. The ACA2P artillery ammunition suite expands the lethality, accuracy and range capabilities of our legacy forces and will fulfill requirements of the future Objective Force FCS/NLOS-Cannon platform.

General Dynamics Ordnance and Tactical Systems and Denel are teamed to bring the United States the most advanced non-developmental artillery ammunition suite available in the world today. The 155mm family offers a full spectrum of ballistically matched effects out to 30 kms with demonstrated interoperability in 39 and 52 caliber platforms. With field interchangeability between a Boat Tail and a Base Bleed, the 155mm ammunition suite offers range and accuracy unmatched in current inventory. The ACA2P artillery ammunition suite expands the lethality, accuracy and range capabilities of our legacy forces and will fulfill requirements of the future Objective Force FCS/NLOS-Cannon platform.

The M795 is a 155mm HE projectile that has longer range and greater efficiency than the M107. It is used for conventional fire support for harassment and interdiction fires, fragmentation, mining and blast effect.

The M795 is made of high fragmentation (HF1) steel and uses a welded rather than a swaged rotating band that encircles the body close to the base. For storage and transport, an energy absorbing lift plug is threaded into the nose cavity. .

The M107 is one of, if not the most widely used of all United States artillery projectiles and still one of the 'NATO standard' projectiles by which all others are measured - the M107, a multi-purpose HE projectile used for blast effect and fragmentation, is one of our finest products.

The 155mm M107 is a separately loaded munition. The shell is hollow forged of AISI 1045 steel and is a conventional design with a streamlined ogive and a boat tail base to provide aerodynamic efficiency.

A swaged gilding metal drive band encircles the shell casing near the base and is protected by a grommet during storage, transport, and handling. A threaded lifting plug occupies the fuse-well during transit and handling. The plug can be replaced before firing by a wide range of standard and commercial fuses .

The M110A2 is a 155mm Smoke projectile used to provide screening or marking smoke. There is a secondary incendiary effect. The M110A2 has the same general appearance as the M107 and have the same design origin.

It is a separate loading munition using a hollow forged steel shell. The shape is ogival with a boat tail for aerodynamic efficiency and a welded steel baseplate. Close to the base is a gilding metal drive band protected by a grommet until jut before loading .

The M804A1 155mm Training Round is the training version of the M107. This is a hollow forged steel shell having ballistic similitude to the M107 and containing a small smoke canister in the fuse-well to provide flash and smoke on impact.